User Tools
playground:alphatross
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | |||
|
playground:alphatross [2022/06/03 11:36] leblanc Remove waiting step, add camera position, fix capitalization. |
playground:alphatross [2022/06/08 09:05] (current) leblanc Same as last revision, which didn't have any changes. |
||
|---|---|---|---|
| Line 45: | Line 45: | ||
| - Source is still grounded. | - Source is still grounded. | ||
| - Source is dirty and requires service. | - Source is dirty and requires service. | ||
| + | - Set the Oven Voltage to 80 V. | ||
| - Set Extractor Voltage to 5kV. | - Set Extractor Voltage to 5kV. | ||
| - Set Bias Voltage to a value that gives desired injection energy. Typical values are at least 53keV. | - Set Bias Voltage to a value that gives desired injection energy. Typical values are at least 53keV. | ||
| Line 55: | Line 56: | ||
| - Primary adjustment at this stage seems to be focus voltage. | - Primary adjustment at this stage seems to be focus voltage. | ||
| - Current may be on the order of 30 μA. | - Current may be on the order of 30 μA. | ||
| - | - Set the Oven Voltage to 80 V. | ||
| - Set Einzel Lens to 20 kV. | - Set Einzel Lens to 20 kV. | ||
| - Wait until the Oven Temperature is at least 160 C, 10 - 20 minutes. | - Wait until the Oven Temperature is at least 160 C, 10 - 20 minutes. | ||
playground/alphatross.1654270560.txt.gz · Last modified: 2022/06/03 11:36 by leblanc
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 3.0 Unported
