Accelerator Control and Monitor Computer Startup Instructions.

• Make sure that the firewall is up and running. If not, reboot the firewall and wait until it is up.
• Reboot the computers at the console (tandem.oual.ohiou.edu and control1.oual.ohiou.edu).
• While the computers are rebooting, power cycle the 3 HP34980A located 1) in the control room over the radiation monitor 2) in the small target on the overhead cable tray 3) at the sputter source if possible.
• After both computers are running login to control1 user "carter" using the usual lab default password.
• Issue the command "startx" on computer control1.oual.ohiou.edu.
• Click on the "start_tandem" icon on the desktop. This should start all of the control and monitoring applications.
• If the monitoring system still isn't working properly, the previously saved data may be corrupt. You can archive and clear the previously saved logging data by clicking on the "Carefull+" button and selecting the "ClearDeviceLogs" then again click on the "Carefull+" button and select "RestartAll". If this doesn't restore operation there may be a network problem or edwards1.phy.ohiou.edu may need attention.